Encore ENH908-NWY 8 Port 10/100 Mbps Switch

key features:

• Complies with 10BASE-T specifications of the IEEE802.3 standard
• Complies with 100BASE-TX specifications of the IEEE802.3u standard
• All RJ-45 ports for 100Base-TX and 10Base-T connectivity
• upports NWay protocol for speed (10/100Mbps) and duplex mode (Half/Full)
  auto-detection
• Supports MDI/MDI-X auto crossover
• Supports MDI/MDI-X auto crossover
• Supports full and half duplex operation on all ports
• Support back-pressure (half duplex) and flow control (IEEE 802.3x)
• Wire-speed packet filtering and forwarding rate
• Store-and-forward architecture filters fragment & CRC error packets
• Supports 1K MAC address entries in whole system
• 128KBytes buffer memory
• Supports extensive LED indicators for network diagnostics
• External power adapter
• FCC Class A, CE

General Information
Manufacturer	Encore
Manufacturer part Number	ENH708-DS
Product Name	Encore ENH908-NWY 8 Port 10/100 Mbps Switch
Specification
Type	Networking Switch
Port	Auto MDI/MDI-X for each port
Standards	IEEE 802.3 - IEEE 802.3u - 10Base-T/100Base-TX - ANSI/IEEE 802.3 Nway auto-negotiation
Connectors	8 RJ-45 jacks (auto MDI/MDI-X selection)
Data Transfer Rate	10/100 Mbps (auto-negotiation)
Duplex Mode	Full/Half (auto-sense)
MAC Address and Self-learning	up to 1 K
Buffer Memory	128 KB
Cable/Max Distance	Category 5 UTP for 100 Mbps and Category 3/4/5 UTP for 10 Mbps, up to 100 m LEDs
Unit	PWR
Power Requirement	1A@+6V DC, 3.1W max consumption
Operating Temperature	0° to 50° C
Humidity	5% to 90%
Dimension	25 x 143 x 83.8 mm (H x W x D)
EMI Rating	FCC Class A, CE Mark
Feature
	Auto-negotiation and auto-sensing on all ports Full and half-duplex operation Wire-speed filtering/forwarding Auto-learning of network configuration Extensive front panel diagnostic LEDs Store and forward transmission method

Store Hours:
Monday - Friday : 9:30 am-6:30 pm PST |Saturday : 11:00 am-4:00 pm PST